-Common Aluminum Coil Grades-

In North America, aluminum coils are among the most widely used forms of aluminum, essential for sectors such as building envelopes, HVAC insulation, transportation equipment, and industrial manufacturing. Different alloy grades offer varying levels of strength, corrosion resistance, and formability. As an aluminum coil supplier, BCM Aluminum maintains a robust inventory of the most common aluminum coil grades in the North American market. All products comply with the ASTM B209 standard.

common aluminum coils

1. 1060 Pure Aluminum Coils: The Versatile, General-Purpose Choice

1060 is a 1000-series industrial pure aluminum with an aluminum content of ≥99.60%. It is the most cost-effective, foundational option in the aluminum coil category. In the H14 temper, it offers a tensile strength of 110–145 MPa, a yield strength of ≥90 MPa, a thermal conductivity of approximately 234 W/(m·K), and a surface thermal reflectivity of ≥85%. The material is soft and highly ductile, allowing for manual bending and forming; it also exhibits excellent weldability and electrical conductivity.

1060 aluminum coil is primarily used for applications such as interior HVAC duct wrapping, protective jacketing for building insulation, waterproof roofing underlayment, and substrates for lightweight suspended ceilings. In dry, inland environments, it can be used in its bare (uncoated) state while still providing sufficient rust resistance. Standard thicknesses range from 0.2 mm to 1.0 mm, with customizable widths available through precision slitting. It serves as a primary, go-to material for HVAC and insulation projects.

2. 3003 Aluminum-Manganese Alloy Coils: The Standard for Corrosion Resistance

3003 is the most common aluminum coil grade in the North American construction industry. Containing 1.0%–1.5% manganese, this alloy is engineered for enhanced corrosion resistance and structural strength. In the H14 temper, the material exhibits a tensile strength of 140–180 MPa and a yield strength of ≥115 MPa. It withstands neutral salt spray testing for ≥500 hours and demonstrates stable resistance to atmospheric corrosion and rainwater erosion. The H24 temper undergoes low-temperature annealing to relieve internal stress, reducing springback by approximately 20%—making it better suited for high-precision roll forming.

3003 aluminum coil is widely used for architectural components such as metal roofing, exterior wall cladding, eave flashings, and standard gutters, as well as for industrial equipment enclosures and stamped hardware parts. When finished with PE, HDP, or PVDF coatings, it can meet various outdoor weather-resistance requirements, serving as a primary material choice for commercial buildings and warehouse facilities.

3105 Aluminum-Manganese-Magnesium Alloy Coils: An Upgraded, Medium-Strength Option

Building upon the 3003 alloy, the 3105 series incorporates magnesium for solid-solution strengthening, positioning its performance between general-purpose rust-resistant aluminum and high-strength aluminum-magnesium alloys. In the H24 temper, it offers a tensile strength of 160–205 MPa and a yield strength of ≥130 MPa—approximately 10% stronger than 3003 in the same temper—while maintaining excellent cold-bending formability.

3105 aluminum coil is the primary alloy used in North America for gutters, downspouts, and drainage systems. After roll forming, it ensures tight seams and stable angles, minimizing the risk of leakage at joints even under long-term freeze-thaw cycles. It is also utilized for medium-load metal roofing, sun-shading louvers, and rolling shutter doors, offering an optimal balance between cost and structural performance.

5052 Aluminum-Magnesium Alloy Coils: High-Strength, Corrosion-Resistant Type

With a magnesium content of 2.2%–2.8%, the 5052 alloy ranks among the strongest of the non-heat-treatable aluminum alloys. In the H32 temper, it features a tensile strength of 215–265 MPa and a yield strength of ≥160 MPa. It withstands neutral salt spray testing for over 1,000 hours and exhibits exceptional resistance to salt spray and weak acid corrosion, earning it the designation of "marine-grade" aluminum.

5052 aluminum coil is designed for demanding environments, including building curtain walls in coastal regions, ship bulkheads and enclosures, freight trailer bodies, and the outer cladding of chemical storage tanks. Compared to 3000-series alloys of the same thickness, these materials offer superior resistance to denting and wind uplift, making them the recommended choice for projects located within 5 kilometers of the coastline.

Color-Coated and Embossed Aluminum Coils: Enhanced-Functionality Options

Using the aforementioned alloys as a substrate, we offer two specialized product lines: color-coated and embossed aluminum coils. BCM color-coated aluminum coils feature a choice of PE, HDP, or PVDF coatings; the PVDF (fluorocarbon) version provides outdoor color retention for 25–30 years and complies with the AAMA 2605 standard. BCM embossed aluminum coils—available in "orange peel," "lentil" (stucco/tread), and "stucco" textures—offer additional benefits such as improved thermal insulation, slip resistance, enhanced dent resistance, and glare reduction.

Drawing on extensive experience with projects in North America, we recommend 3003-alloy aluminum with an HDP coating for standard inland building applications; this provides an optimal balance between cost and service life, eliminating the need for unnecessary, higher-grade alloys. For coastal or highly corrosive environments, we recommend upgrading to a 5052-alloy substrate with a PVDF coating. Selecting the right material for the specific application can reduce material costs by approximately 15%.

BCM maintains a comprehensive inventory of aluminum coils, offering precision slitting, custom coating, and embossing services. Standard specifications can be delivered within 7–15 days. Every shipment includes full ASTM material certification and test reports, with fast delivery available. For pricing on specific alloy grades or assistance with material selection, please provide your project’s operating conditions and dimensional requirements, and we will develop a tailored solution for you.

  • CONTACT US

  • Phone:+1(639)571 1665
  • Email:sales@bcmalu.ca
  • Address:2128 Ottawa Ave West Vancouver BC V7V 2S4
Your name*

Phone Number

Email*

Country*

Message*